Moving from one place to another is a tedious task along with relocating your household items. Most of the houses contain very large and expensive appliances for their ease of household work. House appliances are very substantial and difficult to move. Although it is possible to move with two or more people, it’s secure and trouble-free to get help.
Especially washers and dryers can easily be damaged while moving without proper preparation and planning resulting in costly repairs and parts renewal. Here are some courses of action to Move a Washer and Dryer.
1. Clean it
Cleaning both outside and inside of your washer and dryer can improve the efficiency and lifespan of your appliance. The drum clean options nowadays are available in many of the machines. By switching to that particular option the drum is cleaned in a more hygienic way and can remove lingering odors inside the drum. Deep cleaning tablets are available in the market to remove harmful stagnant dirt. Lastly, make sure that all parts which are cleaned are dried up thoroughly to prevent them from rusting leaving the door open for at least 24 hours to allow it to dry.
2. Unplug The Unit
As we all know it is safe to unplug the machine after the operation to save energy and also while they are moved and transported. This particular task should be done either by referring to the machine’s manual or can be undertaken by a qualified professional. It is very simple to make a mistake that can result in a vicious gas leak and then lead to a fire explosion.
3. Disconnect The Water Supply
The valves for the water supply are usually located behind the appliance. While disconnecting the water supply be very careful as the machines vary according to their type. Some of them have deepwater settings and some don’t (mostly front load machines). It’s better to reach out to a well-established team for this objective since this can damage your appliance without following proper guidelines and cause damage to the machine.
4. Detach and Drain The Hoses
The leftover water will be present inside the hoses and need to be emptied down. Having a large vessel or bucket with slip-joint pliers would help to detach both hot and cold water hoses from the respective valves. By keeping the hoses in an upstanding position it will keep the water away from spilling out and disconnecting successively.
5. Detaching Gas to The Dryer
If your dryer is of gas type, it’s very pivotal to detach the connection as it’s very crucial to prevent toxic gas fumes from escaping into your house. Shutting down gas supply valves should be done after locating them. Using a wrench can help to disconnect the line. A little bit of gas leakage can occur at this point in time and if it is excessive evacuate the home and call a professional to handle the situation.
6. Cleaning Lint Traps and Vents
It’s not a point that you should clean your dryer’s lint traps and vents during transit, but it is an essentially required process to clean it thrice a week after a regular usage so as to avoid a fire hazard. This will lead to a decrease in the electricity bill, reduce the drying time of the machine and in total it will lead to a long life cycle of your dryer.
7. Check for a Mover Kit
The washer’s drum consists of several holes that are pricked around it for in and outflow of water. They come in different sizes and these are designed in a unique way for each process. Most of the manufacturers prefer to have a steel drum as it gives a clean wash and less damage to your clothes rather than a plastic drum. While moving the drums too many jerks can cause severe damage to the appliance as it contains several movable parts. Some of the manufacturers provide a moving kit along with the product. If not you can be on the lookout for Professional House Movers who can provide good services according to your concern.
8. Shield your Washer and Dryer
Shielding the washer and dryer with a moving blanket or extra padded quilts and wrapping it around with moving tape can help it from being scratched and clanked to an extent. By choosing proper equipment like a truck or heavy transport vehicle can ease this process.
9. Shifting the Washer and Dryer
Moving or transporting heavy appliances could not be done alone with proper pieces of equipment, this can lead to severe injury to your body and huge damage to the washer and dryer. Choosing proper equipment like a truck or heavy transport vehicle will be helpful tools when shifting washers and dryers from one location to another.
10. Loading the Washer and Dryer
Depending upon the vehicle whether truck or heavy transport vehicle will determine what kind or how to load the washer and dryer. If it is a truck, invest in coil straps to secure the washer and dryer. While loading heavy appliances into the vehicle or truck make sure that they are evenly distributed to the truck.
The whole process will be a bit annoying when moving homes from one location to another as it is important to keep all your household items in a safe and protected way. This particular task can also not be done alone or with family members, you will need a hand of people who are experts in moving these households. These pieces of tasks can be done with a professional and well-qualified team that listens to each and every customer and has a trustworthy solution for them.
